|
|
|  | 
 
The Bogen ZPM3 is a telephone-compatible zone paging module with all-call and
talk back capabilities serving up to three one- or two-way paging zones.The ZPM3
can also be used in a paging system independent of a telephone system. The ZPM3
works with self-amplified or central-amplified paging systems. A background music
source can be connected directly to the ZPM3, or to a separate amplifier that
can be used to supply background music to all unpaged zones. Built-in DIP switches
are used to select the field-programming mode, enable/disable the pre-announce
and confirmation tones, and set the paging mode (one-way or talk back) of each
zone. Field-programming is used to assign individual zones to the paging zone
groups, night ringer zone group, and shift change/emergency-call zone group*.
Field-programming is also used to enable/disable the privacy beep for two-way
zones, select the shift change/emergency-call tone, and inhibit all-call operation.
A control is included to adjust the volume of the preannounce, confirmation, and
shift change/emergency-call tones. Separate controls are provided to adjust the
night ringer tone and background music volume. All volume controls are screwdriver-adjustable.
- 3 Zone paging plus All-Call 3 Field-programmable paging zone groups
(1-3 zones in each)
- One-way and two-way paging (talk back operation
requires TBA15 Talk Back amplifier)
- Direct connection to page ports (requires
contact closures), loop-start and ground start trunks
- Connection to an
analog station line (station port) possible when used with a suitable telephone
access module, i.e., Bogen Model TAMB
- 100W total power handling capacity
- Background music input
- DIP switches select zone type (one
way or talk back), talk battery (24V/48V), and tone options
- Built-in
night ringer in all zones or group of three user-selected zones
- Shift
change or emergency-call (with alert tone) in all zones or group of three user-selected
zone*
- Programmable all-call inhibit and privacy beep for talk back zones
- Built-in punch block (type 66) speeds installation
- Separate
volume controls for tones, night ring, and background music
- Works with
self-amplified or central amplifier paging systems
- Optional battery
backup
- 24V power supply required - Bogen Model PRSASAC power supply
recommended
- Terminals provided for connection to an additional 48V power
supply when 48V talk battery operation required (Bogen PRS48 power supply recommended)
- Registered under Part 68 of FCC rules
- Includes flanges with
keyhole slots for wall-mounting
*The shift change/emergency-call feature
requires additional customer-supplied equipment - master clock with a contact
closure or preamplified microphone with built-in or external contact closure.
|
|
| |
