|
|
|  | 
 
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power
from which to choose from, with three models ranging from 100W to 250W. The amplifiers
are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker
systems. Each model includes eight module bays for plug-in input modules and allows
for up to four levels of priority between modules.
Two module bays are capable
of accepting signal processing plug-in output modules. Each module is controlled
by an independent volume control with an associated signal/clip LED for signal
status.
An 11-segment LED output meter monitors output signal level. Each model
includes a motorized master volume control that can be controlled using a remote
volume control panel (RVCP, sold separately).- 100-,150-, and 250-watt
models, each with a large power reserve
- Capable of handling 70V, 25V,
8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection
of advanced plug-in modules
- 2 module bays capable of handling signal
processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED output level meter monitors the output level of the power
amplifier with Peak and Average meter switch
- Adjustable output level
limiter with limit indicator
- Tape output available on front of unit
- Optional front-mounted input combo jack with 1/4" stereo phone and female
XLR capabilities
- Motorized master volume control can be remotely operated
- Bass
and treble controls with center detent
- Two-color LED for each channel
indicates input active/clipping
- Switch permits user to select either
transformercoupled outputs or a direct low-impedance output
- Bass and
treble control bypass switch (located in module bay 6)
- 125 Hz Lo-cut
feature (switch located in module bay 6)
- 5-position barrier strip, with
clamping washers, provides connections for speaker loads
- Master mute
function overrides all audio from the mixer section of the amplifier
-
Screw terminal for master mute and remote volume control functions
- Each
of the 8 module bays has an associated independent volume control
- Remote
volume control panel (RVCP) (sold separately)
- Requires flush-mount (Model
BBF) or surfacemount (Model BBS) back boxes (sold separately)
- Requires
front cover door (WMAD sold separately)
- UL and CSA Listed
|
|
| |
