Specs | Manual

Brochure | Accessories

Bogen's Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.
Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

• 5 models ranging from 35W to 250W with a large power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing plug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
• Motorized master volume control that can be remotely operated
• Bass and treble controls
• Two-color LED for each channel indicates input active/clipping
• Lockable switch permits user to select either transformer- coupled outputs or a direct low-impedance output
• 5-position barrier strip, with clamping washers, provides connections for speaker loads
• Master mute function overrides all audio from the mixer section of the amplifier
• Screw terminal for master mute and remote volume control functions
• Each of the 8 module bays has an associated independent volume control
• Bass and treble control bypass switch (located in module bay 6)
• 125 Hz Lo-cut feature (switch located in module bay 6)
• Signal processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
• Pre-EQ unbalanced buffer output signal all unit controls, but any external signal processing equipment connected
• Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
• Remote volume control panel (RVCP) (sold separately)
• Security cover to protect volume, bass, and treble controls (PVSC) (sold separately)
• Rack mountable (rack mounting kit RPK87 sold separately)
• 2 rack spaces high (3-1/2")