|
|
|  | 
 
Bogen's Power Vector modular amplifiers offer a wide range of power from which
to choose from, with five models ranging from 35W to 250W. The amplifiers are
designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker
systems. Each model includes eight module bays for plug-in input modules and allows
up to four levels of priority between modules.
Two module bays are capable
of accepting signal processing plug-in output modules. Each module is controlled
by an independent volume control with an associated signal/clip LED for signal
status.An 11-segment LED output meter monitors output signal level.
Each model
includes a motorized master volume control that can be controlled using a remote
volume control panel (RVCP, sold separately).- 5 models ranging from 35W
to 250W with a large power reserve
- Capable of handling 70V, 25V, 8-ohm,
and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced
plug-in modules
- 2 module bays capable of handling signal processing plug-in
output modules
- 4 levels of priority between modules
- 11-segment
LED output level meter monitors the output level of the power amplifier with Peak
and Average meter switch
- Motorized master volume control that can be
remotely operated
- Bass and treble controls
- Two-color LED for
each channel indicates input active/clipping
- Lockable switch permits user
to select either transformer- coupled outputs or a direct low-impedance output
- 5-position barrier strip, with clamping washers, provides connections
for speaker loads
- Master mute function overrides all audio from the mixer
section of the amplifier
- Screw terminal for master mute and remote volume
control functions
- Each of the 8 module bays has an associated independent
volume control
- Bass and treble control bypass switch (located in module
bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
-
Signal processing insert jacks allow external equipment to be inserted between
the pre-amp output and the power amp input
- Pre-EQ unbalanced buffer output
signal all unit controls, but any external signal processing equipment
connected
- Grounded, unswitched AC convenience receptacle with a 500W
maximum capacity provided for external equipment
- Remote volume control
panel (RVCP) (sold separately)
- Security cover to protect volume, bass,
and treble controls (PVSC) (sold separately)
- Rack mountable (rack mounting
kit RPK87 sold separately)
- 2 rack spaces high (3-1/2")
|
|
| |
