|  | 
 
Bogen models TPU35B,TPU60B,TPU100B, and TPU250 are wall-mounted telephone paging
amplifiers rated at 35, 60, 100, and 250 watts, respectively. The TPU250 can also
be rack-mounted.This group of TPU amplifiers permits paging from telephone and/or
microphone.Music input through an RCA jack or screw terminals.Voice-activated,
variable level, music mute with fade back after page. All the TPU amps in this
group include a night ringer which sends an electronic ringing tone signal through
all speakers, alerting personnel of incoming calls during non-business hours.
Jacks are also provided to bridge two TPU amplifiers to double the number of inputs
and outputs.- 35, 60, 100, and 250-watt models
- Inputs for 600-ohm
balanced telephone line, LO-Z balanced microphone, and background music
- Music
input (RCA jack or screw terminals)
- Integral automatic level control
(ALC) circuit for controlling pages made by persons with varying voice levels
and paging techniques
- Page from telephone and/or microphone
- Signal-activated
paging channel automatically mutes background music
- Adjustable background
music muting level during a page
- Music gradually returns to its normal
level after a page
- Aphex® Aural Exciter increases intelligibility,
improves perceived loudness (with no increase in power), and reduces listener
fatigue
- Separate controls for page volume, music volume, night ringer,
music mute, and Aphex® Aural Exciter
- Bass and treble controls
- Built-in
night ringer activated by contact closure or by 90V ring signal
- Balanced
or unbalanced 16-ohm, 25V, 25VCT, and 70V outputs are available for the TPU35B/60B/100B
models; 25V and 70V outputs are available on the TPU250
- VOX sensitivity
level control eliminates transmission of background noise when paging from a telephone
- Thermal and electronic overload protection
- Jacks provided for
bridging additional TPU amplifiers
- Brackets are attached for easy wall
mounting;TPU250 can be rack-mounted
- TPU-B models can be rack-mounted
with RPK82 kit
- Peak level indicator lights when amplifier is driven into
clipping
- 120V AC, 60Hz power source
- UL and CSA listed
|
|
|
