|
|
|  | 
 
The Bogen TAMB Telephone Access Module is a unique, dual-purpose voice paging
adapter designed as an interface from a telephone system to a paging system. This
versatile unit offers the capability of station port or trunk port operation,
and is compatible with the full range of currently available telephone systems.
Advanced design and Bogen dependability make the TAMB the perfect choice for simple
or complex telephone paging applications. A background music input (with RCA-type
jack and screwdriver-adjustable volume control), which will accept a line level
input from a background music source, is provided. The input permits use of background
music with amplified speaker systems as well as with central paging amplifiers.
- Loop start, ground start, and station port (90V ring up) compatibility
- 600-ohm output
- Pre-announce and confirmation tones (defeatable)
- Adjustable tone volume
- Works with one-way and two-way (talk
back) zones
- Background music input with volume control
- Suppresses
background music during paging
- Station access disconnect is dynamically
controlled using a combination disconnect timer, and VOX disconnect timer or Calling
Party Control (CPC) signal detection
- Disconnect VOX timer is adjustable
from 2 to 6 seconds of silence
- Calling Party Control (CPC) signal from
switch immediately disconnects station port
- 24V or 48V operation (trunk
port mode)
- Wall-mount design
- Easily accessible controls and
switches
- No power supply necessary when connected to a PABX station
port or Centrex line
- 1 normally open contact pair available for operating
external equipment
- Punch-block connections (type 66)
- FCC Part
68 approved
|
|
| |
