|  | 
 
The HDU150 is an attractive, dynamic, all-purpose, uni-directional handheld microphone
ide-ally suited for a wide variety of vocal and sound reinforcement applications.
It features a heavy zinc die cast case with a rigid, low noise cable-mount system
and a lockable silent reed switch. The HDU150 provides a wide dynamic range with
high-end sparkle and minimum feedback. It has a uni-directional pickup pattern,
a low sensitivity to breath and popping sounds, a rubber shock-mount system for
attenuation of handling and cable noise, and a rubberized black finish.
MIC
Type: Hand held
Element: Moving coil dynamic
Polar Pattern: Uni-directional
Impedance: 500-ohm
Frequency Response: 70Hz to 15kHz
Sensitivity*:
-70dB +/- 3dB S/N
Ratio: >65dB
Cable: XLR Male pin 1 = shield (gnd), pin
2 = signal (+), pin 3 = signal (-)
Switch: With sliding-type on/off switch
(lockable, silent reed switch)
Dimensions: 6-1/2" D x 1-1/2" Dia.
Product
Weight: 1 lb.
Material: Zinc die cast
Finish: Rubberized black finish
* (0dB=1V/microbar 1,000 Hz indicated by open circuit)
|
|
|
